Piling Winch/Pile Driver Machine

The pile driver is composed of pile hammer, pile frame and auxiliary equipment. The pile hammer is attached between two parallel vertical guide rods (gantry) at the front of the pile frame, and is lifted by a lifting hook. The pile frame is a steel structure tower with a piling winch at the rear for lifting the pile and the pile hammer.

There is a guide frame composed of two guide rods in front of the pile frame, which is used to control the pile driving direction. The basic technical parameters of the pile driver are the weight of the impact part, the impact kinetic energy and the impact frequency. The pile hammer can be divided into drop hammer, steam hammer, diesel hammer, hydraulic hammer and so on according to the power source of the movement.

Piling Winch

Email:info@cpwinch.com

Pile Driver

High-speed hand control brake-free fall electric piling winch machine is mainly used for lifting weight drops vertically in construction areas, factories, mine sites, and ports.

Email:info@cpwinch.com

Electric Piling Winch

Features Of Electric Piling Winch

High-speed hand control brake-free fall electric piling winch machine for the construction industry, which is mainly used for lifting weight drops vertically in the construction area, factory ,mine site, and port.
Piling machine that uses impact force to penetrate the pile into the ground. It consists of pile hammer, pile frame and auxiliary equipment,in which electric piling winch is the most important part.
The rated load capacity ranges from 2t to 100 tons and is customizable.

Model	Piling Equipment
Load Capacity	2~100 t
Rope capacity	20~300m
Working speed	Up to 36m/min;(single speed and dual speed)
Power supply	220-690V, 50/60HZ, 3Phase

Get Quote

Heavy-duty Free Fall Hammer Winch

Heavy-duty Electric Piling Machine for sale

CP piling machine

CP Machinery JKL Piling Winch for sale

Features Of JKL Type Piling Winch

The piling winch is also named the high-speed free fall drilling rig winch. This series winch is mainly used for lifting weight drops vertically in the construction area, factory and mine site, and port. It is especially suitable for punching pilling works in the freefall at bridges, ports.etc
The structural character is the main shaft rotating (known as a rotating shaft). It is mainly made of a motor, drum, safety brake, hand brake, reducer, underframe, and limiter; According to its driven mode, it includes an electric piling winch and diesel engine piling winch, all controlled by a hand brake with good safety performance.

Model	CP JKL Piling Winch
Load Capacity	2~80 t
Rope Capacity	20~800m
Working speed	5~40m/min;(single speed and dual speed, customizable)
Power supply	220-690V, 50/60HZ, 3Phase

Get Quote

Diesel Pile Driver Supplier

Diesel Engine Pile Driver

Electric Piling Winch Equipment

Main Features Of CP JKL Piling Winch

1, Reasonable structure and design hoist.

2, Easy to install and Maintenance.

3, High efficiency and stable performance.

4, Top quality with competitive and economic price.

5, Double Speed: Low Speed and Normal Speed.

6, Double Limit Switch.

7, Current overload protection function.

8, High-quality polyurethane materials buffer.

9, Emergency stop system.

Heavy duty High-speed Piling Winch for sale

Features Of High-speed 2-10 ton hand-control-brake free-fall electric piling winch machine for construction industry

Safety Instructions about the operation of free fall hammer winch
1. When installing the heavy hammer, the heavy hammer should be transported to within 2m in front of the guide of the pillar of the pile frame.

2. When working at heights, operators should wear seat belts.

3. When the pile driver is running, no one is allowed to enter under the raised hammer.

Model	CP High-speed Hammer Winch
Load Capacity	1~50 t
Rope Capacity	10~300m
Working speed	10~35m/min
Power supply	220-690V, 50/60HZ, 3Phase

Get Quote

Piling Winch with Free-fall Hammer Pile Driver

Free Fall Punching Pile Works

Heavy-duty Hammer Punching Pile Winch

We also produce general winches such as electric winches,hydraulic winches.etc and mining winch,marine winch.etc

Construction Pile Driver

Features Of Construction Pile Driver

The pile driver is mainly divided into a long screw type pile driver, a diesel type and a car type, and a perforated pile driver.

One of the long-spiral pile drivers is used for soft areas, such as plain mud. Punching pile drivers are mainly used

in areas with hard areas. They usually use heavier pile hammers to make cyclic impacts and break stones below the ground.

Piler structure consists of frame, main winch, auxiliary hoist diagonal cable, main column, walk pipe, electrical, mud pump,

clearwater pump, tripod, mud pipe, pipe, hopper, hammer, hammer teeth, pulley.etc

Model	Construction Piling Winch
Load Capacity	1~20 t
Rope Capacity	10~300m
Working speed	5~40m/min
Power supply	220-690V, 50/60HZ, 3Phase

Get Quote

Electric winch for piling work at construction site

Electric pile driver for construction site

Electric Winch for Piling and Rigging Operation

Safety features of CP Piling Winch Machines

1. When the pile driver is working, there must be a special person to command. Commanders and operators must check the signals with each other before working. Work should be closely coordinated.

2. At the beginning, use an electric bell or other means to send a signal to notify the surrounding people to leave.

3. The pile driver and the pile cap, the pile cap and the pipe column (or pile) plane should be leveled, the connecting bolts should be tightened, and it should be checked frequently for looseness.

4. The start-up of the pile driver should be accelerated from low-speed to high-speed.

5. The pile driver should pay close attention to the current and voltage indications on the control panel during work. If abnormal noise or other abnormal conditions are found, it should be stopped immediately for inspection.

6. Always check the bearing temperature and whether the bearing cap screws are loose. Strictly check whether the eccentric iron block connecting screws are loose to prevent accidents.

7. When sinking, it is strictly forbidden to stand around the pipe string (or pile).

8. When the pile driver cooperates with water injection and mud suction to sink, it should contact the relevant personnel in advance, and check each other during the work.

9. When connecting the pipe column or pile and installing the pile cap, the staff must wear safety belts.

10. During the sinking process, it is strictly forbidden to carry out mechanical maintenance and maintenance work.

Model	Piling/Rigging Winch
Load Capacity	0.5~30 t
Rope Capacity	20~300m
Working speed	20~35m/min;(single speed and dual speed)
Power supply	220-690V, 50/60HZ, 3Phase

Get Quote

Heavy-duty Electric Mining Winch

Heavy-duty Electric Piling Winch

Electric Hoist Shaft Sinking Winch

Free-fall Hammer Piling Winch Machine

Other Optional Winch Accessories:

CP Lifting winch is a reliable and cost-effective winch product, it is designed for many lifting and pulling applications. Powered by electricity, diesel engine, or hydraulic power, our winches provide convenient operation, excellent safety, and low operational cost.
If you are looking for a winch machine, just contact CP Machinery. Our winch professionals are here to help you choose the right winch for your application.
Our winches can also be delivered with additional features and options to ensure it is best suited for your application:

Rope spooling device

Single or double drum

Reducer

Types of Lifting Winches For Sale From CP Machinery

We supply many different types of lifting winches to meet your lifting and pulling requirements: low-speed electric winch, high-speed electric winch, single drum electric winch, double drum electric winch, planetary winch, friction winch, diesel winch,hydraulic winch, construction winch, and mining winch. Each type of winch equipment can be custom designed and built according to your actual needs.

Please feel free to give your inquiry in the form. We will reply in 24h.

Welcome to send a free inquiry—info@cpwinch.com

Your Name(required):

Your Tel/Whatsapp(required):

Your Email(required):

Your Company Website:

Your Message(required):

Rated load(T)or pull force(KN):
Drum Capacity(mmxm):
Rope/chain diameter(mm):
3-phase power supply(v/hz):
Speed(m/min):
Power model(electric/hydraulic/diesel):
Other special requirements:

Get Quote